Stainless steel flanged ball valve is a ball valve product made of stainless steel, which is usually used with pneumatic actuators, so it is also called stainless steel pneumatic flanged ball valve. A lot of human resources and precious time, and the product can be used in harsh conditions.

     In order to exert the performance of the stainless steel flanged ball valve, its correct installation is a very critical part. The following will introduce the installation steps of the stainless steel flanged ball valve and some installation points that need to be paid attention to.

Installation steps and key points of stainless steel flanged ball valve:

     1. Remove the protective covers on both sides of the stainless steel flanged ball valve, and flush it with the valve fully opened.

     2. Electrical inspection should be carried out during installation, and installation can only be performed after the inspection is qualified.

     3. It is necessary to flush the impurities in the connected pipeline to avoid damage to the ball valve.

     4. The stainless steel flanged ball valve cannot be used as the lifting point during installation, so as not to damage the ball valve.

     5. The stainless steel flanged ball valve should be installed in the horizontal or vertical direction.

     6. The installation point cannot bear the phenomenon of external force, and it is necessary to use brackets or other supporting objects to correct the deviation of the pipeline.

     7. After connecting, it is necessary to cross-lock the connected bolts with the specified torque.